SIMCO Disclosures

We discuss all things to do with plastic enclsoures and thier applications in the electronics industry.

SIMCO Has the Right Enclosure for Every Need

April 4th, 2015

SIMCO is a one stop shop for plastic enclosures. It has a wide range of plastic enclosures that suits the needs of the current market. This is why Simco is the best manufacturer and supplier of plastic enclosures.

Simco boasts of three main things – variety, durability, and innovation. These three characteristics are what make Simco the leader in the market. It is important to run through all these three characteristics to better understand and even prove why Simco is the leading supplier of plastic enclosures.

plastic-enclosure-simcobox-01

 

On Variety

Simco has a variety of plastic enclosures for every single client on the planet. All of these plastic enclosures are made possible by the best research and development team that Simco employs. Simco has the best designers and engineers who design and create various plastic enclosures.

 

Plastic Utility Boxes

simco-utility-boxes-01There are four main kinds of plastic enclosures offered by Simco. The first kind of plastic enclosures is the Plastic Utility Boxes. There are four different kinds of plastic utility boxes. The first kind is the Wall Mount Enclosures. This offers internal or external wall mounts that can be screwed on flat surfaces like walls or ceilings. The second kind is the Deep Bottom Plastic Enclosures. The third kind is the 4 Outlet Wall Mount Enclosures. This is especially made to be installed over an electric outlet or box. The fourth kind is the Potting Boxes.   This kind of enclosure has a top and bottom panel that attach without screws.

 

Plastic Pocket Size Enclosures

pocket-enclosure-simco-01The second main kind of plastic enclosures offered by Simco is the plastic pocket size enclosures. Simco has two series for the plastic pocket size enclosures. These are the Endeavor 24 Series and the Endeavor 35 Series. Both series have rounded edges and drop-in panels for switches or screens but the latter is slightly larger than the former.

 

Plastic Handheld Enclosures

simc-handheld-enclosure-01The third main kind of plastic enclosures is the plastic handheld enclosures. It has three series – Discovery 36 Series, Discovery 38 Series, and Discovery 45 Series.

The first series is smaller and has provision for batteries. The second series is narrower but taller for devices such as remote controls. The third series is the most ergonomic and has panels for keyboards or switches.

 

Plastic Desktop Enclosures

165The last kind of plastic enclosures is the plastic desktop enclosures.

There are two series under this kind – the Challenger Series and the Enterprise Series.

The Challenger Series is a large project case that is good for devices that are installed on tabletops.

The Enterprise Series is the largest among all of Simco’s plastic enclosures.

 

On Durability

All of Simco’s plastic enclosures are made from ABS plastic. ABS plastic is made from Acrylonitrile butadiene styrene. This kind of plastic is impact resistant as well as weather resistant. This means that Simco’s plastic enclosures can survive years even if exposed under the sun or rain.

Aside from this, all of Simco’s plastic enclosures have an IP65 rating. This means that the electronic devices sealed in a Simco box is protected from dust and water. Simco does not only sell durable plastic enclosures; it also assures that the electronic devices installed within the box are protected as well.

Lastly, all of Simco’s plastic enclosures offer the 94VO-UL version. This version is flame retardant so this is good for electronic devices that will be installed near extremely hot environments.

enclosure-01

On Innovation

When Simco vowed to make all kinds of plastic enclosures, they made sure they kept their promise. Simco launched their custom-made option for customers who have not found a right fit for their electronic devices. Customers who want a fully custom-made plastic enclosure just have to provide Simco with a blueprint. The blueprint will then be given to Simco’s resident designers and engineers. Simco will then contact the customer for further refinement of the initial blueprint. When both parties agree to the final design, it will be manufactured. This assures customers of quality and satisfaction.

Simco also offers custom design for their existing line of plastic enclosures. Companies that order in bulk may opt to etch their company logo on the surface of their chosen plastic enclosure. Simco will gladly accept other external designs requested by their customers. Simco also allows drilling on the side panels of their plastic enclosures. This is to accommodate customer requests on additional windows for screen panels or provisions for switches and buttons.

Simco is not only the leading supplier of plastic enclosures; they also come first when it comes to customer satisfaction. So go ahead and check out all available plastic enclosures at www.simcobox.com and find the best suited plastic enclosure for your electronic devices. You may also check out their existing line of accessories to make your plastic enclosures as personalized as possible.

Your email address will not be published. Required fields are marked *

*

SIMCO Disclosures

We discuss all things to do with plastic enclsoures and thier applications in the electronics industry.